Have you installed our MIB2 PQ Retrofit Kit and are having one of the following audio issues?
- Audio clicking
- Balance/Fader not showing
- Rear speakers not working
More than likely, your vehicle came from the factory with a Dynaudio or Fender Amplified Sound System, and your MIB2 is not yet programmed for this.
Use this installation guide to enable Dynaudio/Fender Audio on your MIB2 Retrofit unit.
Note: An upgraded CAN Gateway is needed to communicate with your MIB2 via Vagcom with your pre-2015 vehicle and complete this fix.
Share this post
- Tags: MIB2 PQ Retrofit