Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat

Volkswagen Highline Emblem Rear View Camera MK5/MK6 Golf, EOS, Passat

Eurozone Tuning

  • $ 1,04999


Manufacturer Warranty

Minimum 6 Months

Guaranteed Fitment

Genuine OEM Parts

Shop With Confidence

Your information is safe

In-House Experts

We know our products

Lead time 4-7 business days

This rearview camera is an OEM highline camera, necessary for a highline camera setup for the vehicles listed below.

This camera will fit in the following vehicles:

  • Volkswagen MK5 GTI/Rabbit/R32 2006-2009
  • Volkswagen MK6 GTI/Golf/Golf R 2010-2014
  • Volkswagen EOS 2007-2015
  • Volkswagen CC 2007-2015
  • Volkswagen Passat B6 2006-2010

Professional Installation is recommended. Removal of door sills and panels is required to feed cable throughout the vehicle.

This kit will work with the following Head Units:

  • RCD510 Touchscreen Radio (ONLY F or H Revision with yellow 26pin camera input)
  • RNS510 Navigation System
  • RNS315 Navigation System
  • MIB2 PQ Nav System

OEM VOLKSWAGEN PART

  • Main Component:
    • OEM Emblem Mounted Rear View Camera (highline)
  • Optional Components:
    • OEM Highline Camera Module (Requires selection in dropdown to be selected): 5N0-907-441A for RCD/RNS,  5N0-907-441B for MIB2
    • OEM Based custom Highline Wiring Harness
    • OEM Drain Tube

Note: Check out our EZT Troubleshooting and Tips Guide if you encounter any hiccups during your install!

Note: Vagcom/VCDS coding is required to enable the Rearview Camera input for the RCD510, RNS510 and RNS315 Head Units or MIB2 PQ. Additional coding is needed, on top of stereo coding.

Note: In depth programming and calibration is necessary for this retrofit. Due to the nature and difficulty of this retrofit, there are no returns.


We Also Recommend

SIGN UP FOR OUR MONTHLY NEWSLETTER

Real Time Web Analytics