Find the installation guide for your factory radio, or work through a problem with a kit you’ve installed.

INSTALLATION LIBRARY
Match the factory radio and controller to your kit. A single model year can have several configurations.
For select 2009–2012 911, Boxster, Cayman and Cayenne models with PCM 3.0. Check the radio face and confirm that AUX is available in the factory source menu before ordering. PCM 2.1 and 3.1 use different hardware.
Use the shortcut on the sheet supplied with your interface. Confirm AUX in the factory source menu before starting.
Board and ribbon installation begins on page 7. Match the shortcut to the instructions supplied with your interface.
Select PCM 3.1 if the original system has factory navigation, or CDR 3.1 if it has the matching non-navigation unit. Confirm the radio face and an available AUX source on either option. Candidate vehicles include 2012–2016 911 (991), Boxster and Cayman, 2011–2017 Cayenne, 2014–2016 Macan and 2010–2016 Panamera.
Use the shortcut on the sheet supplied with your interface. Confirm AUX in the factory source menu before starting.
Board and ribbon installation begins on page 7. Match the shortcut to the instructions supplied with your interface.
Email EZT a photo of the non-navigation CDR radio and interface label for the matching board instructions.
Contact EZT for help identifying the correct guide. Request instructions for this unit.
For select 2017–2018 911, Cayman, Boxster and Macan models equipped with PCM 4.0. Confirm your original system and check which phone features are already enabled.
Use the PCM 4.0 wiring diagram and match the system-switch button to your supplied interface instructions.
Select both the vehicle and its factory system. The Q3 (2014–2018) and A1 (2013–2018) each have RMC and MMI 3G versions. Look for RMC in the version screen before choosing that option.
Hold MEDIA or NAV.
Hold MEDIA.
Hold MEDIA or NAV.
Match the A1H wiring diagram to kit label.
Match the display diagonal and the software prefix on the original version screen. The small MSTD and 7-inch options differ from the later CLU wide-screen setup.
Hold MEDIA.
Hold MEDIA.
Confirm the CLU display and interface label with EZT before applying display settings from this guide.
Start with the software version in the Audi settings. The HN, MHI2 and RMC entries identify different interfaces. The earlier C6 HNav and 6.5-inch RMC options listed here are for the A6.
Hold MEDIA.
Hold MEDIA.
Hold MEDIA.
Hold NAV or MEDIA.
For select 2012–2018 D4 A8 models with the original MMI 3G+ system. Confirm the MMI version on the factory screen before ordering.
Hold NAV.
For select B8/B8.5 A4, S4, A5, S5, RS5 and Allroad. Match the control layout to the two photos below. For 2008 or 2016 transition-year cars, send a photo before ordering.
Hold MEDIA or NAV.
Hold MEDIA or CAR. some steering wheels use NAV.
For B9 A4, S4, A5 and S5 with the original 7- or 8.3-inch non-touch display and matching MIB hardware. The display size determines which interface ships. Check whether your car already has the phone features you want.
Hold MEDIA.
Hold MEDIA.
A first-generation Q5 can have MMI or a basic radio. Later Q5s use a different MIB interface. Select the radio from the version screen and console layout.
Hold MEDIA.
Hold MEDIA or NAV.
Hold MEDIA or CAR. some steering wheels use NAV.
Earlier Q7s use the MMI interface. Later Q7s use MIB hardware. The model-year choices below are supplier generation ranges. Confirm the factory menu on transition-year cars, especially North American models.
Hold NAV or MEDIA.
Hold MEDIA.
For U.S. i3 models, check NBT on 2014–2017 cars and EVO on 2017–2020 cars. Both show up in 2017. The original home menu identifies which option to order.
Hold iDrive MENU. For AUX audio select Multimedia, External devices, AUX front.
Specific to i3 NBT. Screen p 3. audio pp 10–13.
Email EZT your i3 EVO interface label for the correct instructions before removing trim.
Contact EZT for help identifying the correct guide. Request instructions for this unit.
For select factory CIC systems, including BMW E9x 3 Series, E70 X5, E84 X1, E89 Z4 and select MINI models. Check the menu, controller and screen. CCC, NBT and EVO use different hardware.
Press and hold MENU or BACK as shown in your CIC guide. Select AUX Front when using AUX audio. Match your knob, display and wiring revision to the diagram.
Screen and controller examples pp 3–5, wiring pp 8–12, audio pp 19–23, cameras pp 24–27.
Alternate edition. Screen/controller examples pp 3–5. Match leads and diagram to supplied hardware.
Three connection topologies are labeled on pp 1–3. Match the harness to the applicable diagram.
For select BMW and MINI with the original NBT EVO ID5 or ID6 system. Check which phone functions your car already has. MINI five-icon layouts need photo confirmation. The i3 uses separate hardware.
Hold MENU on iDrive. With a supplied USB sound adapter select the corresponding factory USB source. with the BT transmitter match the BT-specific manual. Do not swap audio instructions between revisions.
Check which audio adapter shipped. USB audio p 11. Screen setup pp 3–4.
Select if the kit shipped with a Bluetooth transmitter. Pairing pp 12–15.
For select BMW and MINI with the original NBT system, identified as NBT ID4 in the kit selector. Examples include F30 3 Series, F10 5 Series, F15 X5 and select MINI F-series cars. The i3 requires its own interface.
Hold iDrive MENU to switch. For AUX audio open Multimedia, External devices, AUX front. The manual distinguishes the AUX connection on certain 1/2/3/4 Series.
Factory menu examples p 3. audio pp 10–14. switch at p 6.
For select 2016–2018 A-Class W176, B-Class W246, CLA and GLA with NTG5.0, 5.1 or 5.2. Earlier NTG4.5 and 4.7 cars use a different kit.
Hold the star/favorites button.
For the late W212 E-Class or C207 E-Class coupe with NTG5.0. An E-Class badge alone cannot identify the radio. Check the original menu, especially on late W212 and early W213 cars.
Hold the star/favorites button.
For select 2015–2018 GLE and GLS vehicles fitted with NTG5.0. Verify the original screen and center-console controller. Earlier ML and GL systems require a different fitment check.
Hold the star/favorites button.
Match the factory menu to NTG4.5 or NTG4.7. Common candidates include the W204 C-Class, W212 E-Class, C207 E-Class coupe, W176 A-Class, W246 B-Class, CLA, GLA, W218 CLS, GLK, ML/GL, W463 G-Class and R172 SLK. Production changes vary. Send a photo for SL-Class or transition-year fitment.
Hold C.
For select 2014–2018 W222 S-Class vehicles with the 12.3-inch factory display and matching NTG5 system. A 12.3-inch screen alone does not identify the head unit.
Hold the star/favorites button.
For select 2014–2018 W447 V-Class with a compatible NTG5 setup. Check the original display and controller. Ask EZT to verify other regional W447 configurations before ordering.
Hold the star/favorites button.
For select 2015–2018 W205-generation C-Class and GLC vehicles with NTG5.0, 5.1 or 5.2. Check the standard or widescreen factory display and the center controller before ordering.
Hold the star/favorites button.
Select Range Rover, Range Rover Sport, Evoque, Discovery, Discovery Sport, Jaguar F-TYPE, XF and XE. On the illustrated Bosch home screens the clock is at the upper right. Harman shows it at the upper center. Match the layout and screen size.
Hold NAV for the supplied Bosch revision. Select AUX on the factory radio if using AUX sound.
Bosch system examples p 3, vehicle switches pp 4–5, system change p 7, audio pp 13–16, cameras pp 17–20.
Hold NAV for the supplied Bosch revision. Select AUX on the factory radio if using AUX sound.
Bosch system examples p 3, vehicle switches pp 4–5, system change p 7, audio pp 13–16, cameras pp 17–20.
Use the Harman 8-inch diagram on page 1. Verify the exact box and harness before installation.
Page 1 is 8-inch only.
Use the Harman 10.25-inch diagram on page 2. Verify the exact box and harness before installation.
Page 2 is 10.25-inch only.
Identify the controller beside the shifter first. Choose the rotary knob, joystick, small touchpad or large touchpad. Select U.S. candidates include ES, IS and LS (2014–2019), GS, NX, LX and RC (2015–2019), RX (2016–2019), CT (2015–2017), LC (2018–2019) and UX (2019). Factory controller and screen still determine fit.
Hold MENU at the controller and select AUX on the original stereo for AUX sound. Use page 1 of the shared wiring diagram.
Display pp 3–7. audio pp 13–15. camera/flicker pp 16–19.
Use page 1 for the rotary knob.
Hold MENU. For wrong directional response select the remote-lever controller mode in the supplied manual p 28.
Joystick display settings pp 6–7. small touchpad pp 8–9. Audio pp 15–18. camera/flicker pp 19–22. controller mode p 28.
Page 1 is default. page 2 is the alternate controller connection covered by manual pp 23–25.
Hold MENU. For wrong directional response select the touchpad mode for the original controller on manual p 28.
Joystick display settings pp 6–7. small touchpad pp 8–9. Audio pp 15–18. camera/flicker pp 19–22. controller mode p 28.
Page 1 is default. page 2 is the alternate controller connection covered by manual pp 23–25.
Hold MENU and select AUX on the original stereo when using AUX sound. Page 2 of the shared wiring diagram is the large pad.
Display pp 3–6. audio pp 12–14. camera/flicker pp 15–18.
Use page 2 for the large touchpad.
Try the make or factory system, or send us a photo of your radio.
TROUBLESHOOTING
Choose the closest symptom. Use your kit’s guide for connector positions and switch settings.