Eurozone Tuning

UPGRADE FINDER

CarPlay Support

RETROFIT SUPPORT

CarPlay kit
support.

Find the installation guide for your factory radio, or work through a problem with a kit you’ve installed.

CarPlay running on the original dashboard display of an EZT-equipped Mercedes-Benz

INSTALLATION LIBRARY

Find your guide

Match the factory radio and controller to your kit. A single model year can have several configurations.

24 kit families

Porsche

Porsche PCM 3.0

For select 2009–2012 911, Boxster, Cayman and Cayenne models with PCM 3.0. Check the radio face and confirm that AUX is available in the factory source menu before ordering. PCM 2.1 and 3.1 use different hardware.

PCM 3.0

Use the shortcut on the sheet supplied with your interface. Confirm AUX in the factory source menu before starting.

Board and ribbon installation begins on page 7. Match the shortcut to the instructions supplied with your interface.

PCM 3.0 wiring diagramPDF · 1 page
Ask EZT about this kit
Porsche PCM 3.1 / CDR 3.1

Select PCM 3.1 if the original system has factory navigation, or CDR 3.1 if it has the matching non-navigation unit. Confirm the radio face and an available AUX source on either option. Candidate vehicles include 2012–2016 911 (991), Boxster and Cayman, 2011–2017 Cayenne, 2014–2016 Macan and 2010–2016 Panamera.

PCM 3.1 (With Navigation)

Use the shortcut on the sheet supplied with your interface. Confirm AUX in the factory source menu before starting.

Board and ribbon installation begins on page 7. Match the shortcut to the instructions supplied with your interface.

PCM 3.1 wiring diagramPDF · 1 page

CDR 3.1 (Without Navigation)

Email EZT a photo of the non-navigation CDR radio and interface label for the matching board instructions.

Contact EZT for help identifying the correct guide. Request instructions for this unit.

Ask EZT about this kit
Porsche PCM 4.0

For select 2017–2018 911, Cayman, Boxster and Macan models equipped with PCM 4.0. Confirm your original system and check which phone features are already enabled.

PCM 4.0

Use the PCM 4.0 wiring diagram and match the system-switch button to your supplied interface instructions.

PCM 4.0 wiring diagramPDF · 1 page
Ask EZT about this kit

Audi

Audi A1 / Q3

Select both the vehicle and its factory system. The Q3 (2014–2018) and A1 (2013–2018) each have RMC and MMI 3G versions. Look for RMC in the version screen before choosing that option.

Q3 RMC

Hold MEDIA or NAV.

RMC wiring diagramPDF · 1 page

Q3 MMI 3G

Hold MEDIA.

A1 RMC

Hold MEDIA or NAV.

RMC wiring diagramPDF · 1 page

A1 MMI 3G

Match the A1H wiring diagram to kit label.

Ask EZT about this kit
Audi A3 8V MIB

Match the display diagonal and the software prefix on the original version screen. The small MSTD and 7-inch options differ from the later CLU wide-screen setup.

5.8- or 6.3-inch MSTD, 2013–2018

Hold MEDIA.

7-inch, 2013–2018

Hold MEDIA.

8-inch CLU, 2017–2018

Confirm the CLU display and interface label with EZT before applying display settings from this guide.

Ask EZT about this kit
Audi A6 / A7 MMI, MIB2 or RMC

Start with the software version in the Audi settings. The HN, MHI2 and RMC entries identify different interfaces. The earlier C6 HNav and 6.5-inch RMC options listed here are for the A6.

MMI 3G+ HN, 2012–2015

Hold MEDIA.

MMI wiring diagramPDF · 1 page

MIB2 MHI2, 2016–2018

Hold MEDIA.

MMI wiring diagramPDF · 1 page

A6 6.5-inch RMC, 2012–2018

Hold MEDIA.

A6 RMC wiring diagramPDF · 1 page

A6 C6 HNav, 2010–2011

Hold NAV or MEDIA.

MMI wiring diagramPDF · 1 page
Ask EZT about this kit
Audi A8 D4 MMI 3G+

For select 2012–2018 D4 A8 models with the original MMI 3G+ system. Confirm the MMI version on the factory screen before ordering.

MMI 3G+

Hold NAV.

MMI wiring diagramPDF · 1 page
Ask EZT about this kit
Audi B8 / B8.5

For select B8/B8.5 A4, S4, A5, S5, RS5 and Allroad. Match the control layout to the two photos below. For 2008 or 2016 transition-year cars, send a photo before ordering.

Vehicle equipped with MMI

Hold MEDIA or NAV.

MMI wiring diagramPDF · 1 page

Vehicle NOT equipped with MMI

Hold MEDIA or CAR. some steering wheels use NAV.

Ask EZT about this kit
Audi B9 A4 / S4 / A5 / S5 MIB

For B9 A4, S4, A5 and S5 with the original 7- or 8.3-inch non-touch display and matching MIB hardware. The display size determines which interface ships. Check whether your car already has the phone features you want.

7-inch MIB DEV/CLU

Hold MEDIA.

MIB wiring diagramPDF · 1 page

8.3-inch MIB DEV/CLU

Hold MEDIA.

MIB wiring diagramPDF · 1 page
Ask EZT about this kit
Audi Q5 MMI, MIB or Basic Radio

A first-generation Q5 can have MMI or a basic radio. Later Q5s use a different MIB interface. Select the radio from the version screen and console layout.

2018–2019 MIB DEV/CLU

Hold MEDIA.

MIB wiring diagramPDF · 1 page

2009–2017 BNav / HNav / HN+

Hold MEDIA or NAV.

MMI wiring diagramPDF · 1 page

2009–2017 basic radio

Hold MEDIA or CAR. some steering wheels use NAV.

Ask EZT about this kit
Audi Q7 MMI or MIB

Earlier Q7s use the MMI interface. Later Q7s use MIB hardware. The model-year choices below are supplier generation ranges. Confirm the factory menu on transition-year cars, especially North American models.

2010–2015 MMI

Hold NAV or MEDIA.

MMI wiring diagramPDF · 1 page

2016–2019 MIB

Hold MEDIA.

MIB wiring diagramPDF · 1 page
Ask EZT about this kit

BMW / MINI

BMW i3 I01 NBT / EVO

For U.S. i3 models, check NBT on 2014–2017 cars and EVO on 2017–2020 cars. Both show up in 2017. The original home menu identifies which option to order.

NBT

Hold iDrive MENU. For AUX audio select Multimedia, External devices, AUX front.

Specific to i3 NBT. Screen p 3. audio pp 10–13.

EVO

Email EZT your i3 EVO interface label for the correct instructions before removing trim.

Contact EZT for help identifying the correct guide. Request instructions for this unit.

Ask EZT about this kit
BMW / MINI CIC iDrive

For select factory CIC systems, including BMW E9x 3 Series, E70 X5, E84 X1, E89 Z4 and select MINI models. Check the menu, controller and screen. CCC, NBT and EVO use different hardware.

Factory CIC

Press and hold MENU or BACK as shown in your CIC guide. Select AUX Front when using AUX audio. Match your knob, display and wiring revision to the diagram.

CIC installation manualPDF · 30 pages

Screen and controller examples pp 3–5, wiring pp 8–12, audio pp 19–23, cameras pp 24–27.

Alternate edition. Screen/controller examples pp 3–5. Match leads and diagram to supplied hardware.

CIC wiring diagramsPDF · 3 pages

Three connection topologies are labeled on pp 1–3. Match the harness to the applicable diagram.

Ask EZT about this kit
BMW / MINI NBT EVO ID5 / ID6

For select BMW and MINI with the original NBT EVO ID5 or ID6 system. Check which phone functions your car already has. MINI five-icon layouts need photo confirmation. The i3 uses separate hardware.

EVO ID5 / ID6

Hold MENU on iDrive. With a supplied USB sound adapter select the corresponding factory USB source. with the BT transmitter match the BT-specific manual. Do not swap audio instructions between revisions.

Check which audio adapter shipped. USB audio p 11. Screen setup pp 3–4.

Select if the kit shipped with a Bluetooth transmitter. Pairing pp 12–15.

EVO wiring diagramPDF · 1 page
Ask EZT about this kit
BMW / MINI NBT iDrive

For select BMW and MINI with the original NBT system, identified as NBT ID4 in the kit selector. Examples include F30 3 Series, F10 5 Series, F15 X5 and select MINI F-series cars. The i3 requires its own interface.

Factory NBT / ID4

Hold iDrive MENU to switch. For AUX audio open Multimedia, External devices, AUX front. The manual distinguishes the AUX connection on certain 1/2/3/4 Series.

NBT installation manualPDF · 21 pages

Factory menu examples p 3. audio pp 10–14. switch at p 6.

NBT wiring diagramPDF · 1 page
Ask EZT about this kit

Mercedes-Benz

Mercedes-Benz A / B / CLA / GLA NTG5

For select 2016–2018 A-Class W176, B-Class W246, CLA and GLA with NTG5.0, 5.1 or 5.2. Earlier NTG4.5 and 4.7 cars use a different kit.

2016–2018 A W176, B W246, CLA and GLA with NTG5.0/5.1/5.2

Hold the star/favorites button.

Ask EZT about this kit
Mercedes-Benz E-Class W212 / C207 NTG5

For the late W212 E-Class or C207 E-Class coupe with NTG5.0. An E-Class badge alone cannot identify the radio. Check the original menu, especially on late W212 and early W213 cars.

W212 or C207 with NTG5.0

Hold the star/favorites button.

Ask EZT about this kit
Mercedes-Benz GLE / GLS NTG5

For select 2015–2018 GLE and GLS vehicles fitted with NTG5.0. Verify the original screen and center-console controller. Earlier ML and GL systems require a different fitment check.

2015–2018 GLE / GLS with NTG5.0

Hold the star/favorites button.

Ask EZT about this kit
Mercedes-Benz NTG4.5 / NTG4.7

Match the factory menu to NTG4.5 or NTG4.7. Common candidates include the W204 C-Class, W212 E-Class, C207 E-Class coupe, W176 A-Class, W246 B-Class, CLA, GLA, W218 CLS, GLK, ML/GL, W463 G-Class and R172 SLK. Production changes vary. Send a photo for SL-Class or transition-year fitment.

Supported models with verified NTG4.5 or NTG4.7

Hold C.

NTG4.5 wiring diagramPDF · 1 page
Ask EZT about this kit
Mercedes-Benz S-Class W222 NTG5

For select 2014–2018 W222 S-Class vehicles with the 12.3-inch factory display and matching NTG5 system. A 12.3-inch screen alone does not identify the head unit.

2014–2018 W222 with matching NTG5 hardware and 12.3-inch factory screen

Hold the star/favorites button.

Ask EZT about this kit
Mercedes-Benz V-Class W447 NTG5

For select 2014–2018 W447 V-Class with a compatible NTG5 setup. Check the original display and controller. Ask EZT to verify other regional W447 configurations before ordering.

2014–2018 W447 V-Class with matching NTG5 setup

Hold the star/favorites button.

Ask EZT about this kit
Mercedes-Benz W205 C-Class / GLC

For select 2015–2018 W205-generation C-Class and GLC vehicles with NTG5.0, 5.1 or 5.2. Check the standard or widescreen factory display and the center controller before ordering.

2015–2018 C-Class/GLC with NTG5.0/5.1/5.2

Hold the star/favorites button.

Ask EZT about this kit

Jaguar / Land Rover

Jaguar / Land Rover Bosch or Harman

Select Range Rover, Range Rover Sport, Evoque, Discovery, Discovery Sport, Jaguar F-TYPE, XF and XE. On the illustrated Bosch home screens the clock is at the upper right. Harman shows it at the upper center. Match the layout and screen size.

Bosch 2012–2015

Hold NAV for the supplied Bosch revision. Select AUX on the factory radio if using AUX sound.

Bosch installation manualPDF · 24 pages

Bosch system examples p 3, vehicle switches pp 4–5, system change p 7, audio pp 13–16, cameras pp 17–20.

Bosch wiring diagramPDF · 1 page

Bosch 2015–2016

Hold NAV for the supplied Bosch revision. Select AUX on the factory radio if using AUX sound.

Bosch installation manualPDF · 24 pages

Bosch system examples p 3, vehicle switches pp 4–5, system change p 7, audio pp 13–16, cameras pp 17–20.

Bosch wiring diagramPDF · 1 page

Harman 8-inch

Use the Harman 8-inch diagram on page 1. Verify the exact box and harness before installation.

Page 1 is 8-inch only.

Harman 10.25-inch

Use the Harman 10.25-inch diagram on page 2. Verify the exact box and harness before installation.

Page 2 is 10.25-inch only.

Ask EZT about this kit

Lexus

Lexus Remote Touch / Rotary Controller

Identify the controller beside the shifter first. Choose the rotary knob, joystick, small touchpad or large touchpad. Select U.S. candidates include ES, IS and LS (2014–2019), GS, NX, LX and RC (2015–2019), RX (2016–2019), CT (2015–2017), LC (2018–2019) and UX (2019). Factory controller and screen still determine fit.

Rotary knob

Hold MENU at the controller and select AUX on the original stereo for AUX sound. Use page 1 of the shared wiring diagram.

Display pp 3–7. audio pp 13–15. camera/flicker pp 16–19.

Use page 1 for the rotary knob.

Joystick

Hold MENU. For wrong directional response select the remote-lever controller mode in the supplied manual p 28.

Joystick display settings pp 6–7. small touchpad pp 8–9. Audio pp 15–18. camera/flicker pp 19–22. controller mode p 28.

Page 1 is default. page 2 is the alternate controller connection covered by manual pp 23–25.

Small touchpad

Hold MENU. For wrong directional response select the touchpad mode for the original controller on manual p 28.

Joystick display settings pp 6–7. small touchpad pp 8–9. Audio pp 15–18. camera/flicker pp 19–22. controller mode p 28.

Page 1 is default. page 2 is the alternate controller connection covered by manual pp 23–25.

Large touchpad

Hold MENU and select AUX on the original stereo when using AUX sound. Page 2 of the shared wiring diagram is the large pad.

Display pp 3–6. audio pp 12–14. camera/flicker pp 15–18.

Use page 2 for the large touchpad.

Ask EZT about this kit

TROUBLESHOOTING

What’s happening?

Choose the closest symptom. Use your kit’s guide for connector positions and switch settings.

CarPlay opens but there’s no sound
  1. Play music on the factory radio first. If the radio is also silent, tell EZT before changing interface settings.
  2. If factory audio works, play a song in CarPlay and select the original media source for your kit. Porsche AUX kits need AUX selected. Mercedes and BMW adapter revisions may use USB or Bluetooth audio instead. Match the original source to the output in the interface’s audio menu.
  3. If music plays but calls are silent, check the call output on the phone during a parked test call. Tell EZT which of music, calls and navigation prompts you can hear.
My phone won’t connect
  1. Start parked. Open the interface’s phone pairing menu. For wireless pairing, enable Wi-Fi and Bluetooth on the phone and accept the CarPlay or Android Auto prompt.
  2. If wireless pairing stalls, restart the phone. On iPhone, open Settings › General › CarPlay, forget the old pairing and pair again. On Android, review previously connected cars in Android Auto settings.
  3. For a kit that supports wired connection, test the interface USB lead with a short, known-good data cable. If wired works, tell EZT that the failure is limited to wireless.

Apple CarPlay support · Android Auto support

The display is black, cut off or flickering
  1. Try switching back to the original factory menu. Note whether the original picture is normal, or whether both views are affected.
  2. If only the retrofit view is affected, compare your original screen size and interface label with the display setup section for your exact kit. A photo of the current DIP switch positions helps EZT match the correct chart.
  3. If both views are affected, leave the dash open for the installer to confirm the display connections against the wiring diagram. Power the interface down as its guide directs before changing connections or switches.
The factory controls won’t open the interface
  1. Confirm that the original factory menus still respond. In the kit guide, find the system-switch button and use its long press. The shortcut varies by kit and controller.
  2. If the phone screen opens but the cursor moves the wrong way, check the controller version in the guide. The Lexus joystick and small touchpad use different controller modes.
  3. If the interface still does not respond, send a photo of the factory controller and the interface label. Include which buttons still operate the original menus.
The reverse camera shows the wrong view
  1. Identify whether the camera is factory-installed or an aftermarket RCA camera. Look up the camera section for the exact kit and transmission.
  2. For the original camera, check whether the interface camera source is set to Original. For an added camera, check the Aftermarket source and have the installer compare the video and trigger connections to that kit’s diagram.
  3. Tell EZT whether the display switches when reverse is selected, whether the screen is black, and whether the camera worked on the factory system before installation.
I need help choosing the right guide
  1. Start with the original radio menu and the controller beside the shifter. Look for a system name or software-version screen and note the factory display size.
  2. Choose the vehicle below, then match its factory system, interface label and supplied audio adapter to a guide. Some model years were sold with two different systems.
  3. If the label or connector differs from the illustration, send photos and your order number to EZT so we can identify the right revision.
Clicky