Eurozone Tuning

UPGRADE FINDER
- 32%
Load image into Gallery viewer, Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30

Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30

$ 281.00 $ 189.00
EZT Special Order product
Sourced to EZT first
Special Order
Sourced from our supplier and shipped to EZT first, then checked and sent to you. Supplier lead time applies.
A LITTLE HELP BEFORE YOU BUY

Ask EZT

Fitment, features or your next upgrade. Ask away.

YOUR QUESTION IS ABOUTBilstein B6 Front Strut | 1988-1991 BMW 325iX E30

Email photos to EZT (optional)

Add your vehicle (optional)

Email EZT directly

We'll reply by email.

Privacy policy

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Shipping info

Special order: Supplier lead time applies. See the listing for the estimate for this item or contact EZT before ordering.

Transit time is additional. Tracking is emailed after shipment. Any product-specific backorder or availability notice takes precedence.

Availability: Worldwide shipping is available for most items.

Airbags can only be shipped within the Continental US.

Pay With
Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30
$ 281.00 $ 189.00
Eurozone Tuning Logo

Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30

Refresh and tighten up the front suspension on your AWD E30 with the Bilstein B6 Performance Front Strut.

This front strut insert is designed specifically for the 1988-1991 BMW 325iX E30, giving the ix chassis better front-end control, sharper response, and improved stability while retaining a street-friendly ride.

Built with Bilstein’s proven 36mm monotube gas-pressure design, the B6 is an ideal upgrade for 325iX owners who want a stronger, more controlled damper without going to a full coilover setup.

Sold individually. Order quantity 2 if replacing both front strut inserts.

Overview

The Bilstein B6 Performance front strut insert is a high-quality replacement and performance upgrade for the BMW E30 325iX. It is designed to improve damping control while keeping the car comfortable enough for real street use.

Compared to a tired factory insert, the B6 helps reduce front-end float, brake dive, and vague steering feel. The result is a more composed front suspension that feels better during daily driving, backroad use, and spirited cornering.

Perfect Match for a Proper 325iX Refresh

The 325iX uses AWD-specific suspension components, so using the correct front strut insert matters. This Bilstein B6 insert is listed specifically for the E30 325iX front application.

Key Features
  • Bilstein B6 Performance front strut insert
  • Designed for the 1988-1991 BMW 325iX E30
  • Fits front left or front right position
  • 36mm monotube internal design
  • Gas-pressure construction for consistent damping performance
  • Application-specific valving for the 325iX chassis
  • Improves front-end control, stability, and steering response
  • Helps reduce excessive brake dive and body motion from worn factory dampers
  • Designed to work with factory-style suspension layouts
  • Great upgrade for street-driven restorations, OEM+ builds, and enthusiast cars
  • Sold individually
  • Order quantity 2 to replace both front strut inserts
Bilstein Part #34-002513 EZT SKU: BIL34-002513 Front Strut Insert 36mm Monotube B6 Performance Sold Individually
Technical Specs
Brand Bilstein
Product Line B6 Performance
Manufacturer Part Number 34-002513
EZT SKU BIL34-002513
Position Front
Orientation Front Left or Front Right
Product Type Strut Insert / Strut Cartridge
Internal Design Monotube
Diameter 36mm
Damping Non-adjustable
OE Reference 31 32 1 133 563
Vehicle Fitment 1988-1991 BMW 325iX E30
Drivetrain Fitment AWD / ix models only
Ride Height Requirement Stock height / 0 in. lift-drop
Quantity Included 1 front strut insert
Ordering Note Order quantity 2 to replace both front strut inserts

This listing is for one individual front strut insert. If servicing both front sides of the vehicle, add quantity 2 to your cart.

Fitment

This Bilstein B6 front strut insert fits stock-height BMW E30 325iX models with 0 in. lift/drop.

  • 1988 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop
  • 1989 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop
  • 1990 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop
  • 1991 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop
Important Fitment Note

This front strut insert is for the AWD E30 325iX front suspension only. It is not intended for standard RWD E30 models or E30 M3 models.

If you are unsure whether this fits your vehicle, send us your VIN before ordering and we can help confirm compatibility.

What’s Included
  • 1 Bilstein B6 front strut insert
  • Included Bilstein-supplied insert hardware, when applicable
What’s Not Included
  • Second front strut insert
  • Rear shocks
  • Front strut housings
  • Springs
  • Upper strut mounts
  • Bump stops
  • Dust boots
  • Spring pads
  • Factory mounting hardware unless supplied by Bilstein
  • Alignment service
Installation Notes
  • Professional installation is recommended.
  • This is a front strut insert and is installed into the existing front strut housing.
  • Order quantity 2 if replacing both front strut inserts.
  • Inspect the front strut housing before installation.
  • Inspect or replace upper strut mounts, bump stops, dust boots, and spring pads during installation.
  • An alignment is strongly recommended after suspension work.
  • If pairing with lowering springs, confirm the spring and damper combination is appropriate for your intended use.
EZT Recommendation

For the best result, replace front strut inserts in pairs and inspect the full front suspension while everything is apart. On an older E30 325iX, fresh mounts and related wear items can make a huge difference in how the car feels after installation.

Shipping

Ships directly to your door with tracking once fulfilled.

Product images may be for reference only. Actual strut insert design, label style, and included hardware may vary slightly depending on the manufacturer batch.

B6 is my pick when you want tighter body control at stock ride height. It gives the car a more tied-down feel without committing to lowering springs or a full coilover setup.
Warranty & Product Support Coverage for manufacturing defects, with help from EZT when you need it.

Eurozone Tuning

  • EZT-Branded Kits: 6 months for repair or replacement due to manufacturing defects. Improper installation, accidents and misuse are excluded.
  • EZT Carbon Edition Steering Wheels: 1 year for workmanship. Physical misuse, harsh-environment damage and improper installation are excluded.

Brakes

  • Brembo: 24-month limited warranty on eligible U.S. purchases from authorized sellers.
  • DFC: 12 months / 12,000 miles, whichever comes first. Licensed professional installation and normal street use are required.
  • PowerStop: Standalone calipers: 90 days / 3,000 miles, whichever comes first. Complete brake-kit coverage varies by product line.
  • SHW Performance: Contact us for the warranty terms applicable to your specific part.
  • Porterfield: Racing and competition parts carry no manufacturer warranty. Contact us about street-pad defect concerns.

Exhaust, Cooling & Fluids

  • AWE: Limited lifetime coverage on exhaust tubing, welds and flex sections. Mechanical valves: 3 years. Valve motors, electronics, catalysts, intakes and intercoolers: 1 year. Tip coverage varies by finish.
  • Milltek: Limited lifetime coverage on eligible exhaust components. Catalysts and downpipes: 2 years / 80,000 km. Electronics: 2 years. Valve-equipped components and other exceptions follow the applicable product and regional terms.
  • ZAC Motorsport: 2 years on standard products. Custom/made-to-order items, wheels and brake components are excluded. Tuning and built drivetrain products have separate terms.
  • CSF: 2-year limited warranty on eligible high-performance cooling products under normal use.
  • Motul: Contact us promptly about leaking, damaged or suspected defective products. Keep the packaging and batch information for review.

Suspension

  • KW: Limited lifetime coverage on eligible street suspension systems. Accessories and other product lines have separate terms.
  • ST: Coilovers: 5 years. Other components have different coverage periods.
  • Eibach: Eligible springs and sway bars: 5 years. Listed shocks, dampers and truck coilovers: 2 years. Listed accessories and wear parts: 1 year. Coverage depends on the product line.
  • Öhlins: Automotive Road & Track: 2 years, excluding finish. Racing applications are excluded.
  • Bilstein: Limited lifetime coverage on many eligible North American products. Certain product lines have shorter terms.
Need to start a claim?

Email support@eurozonetuning.com with your order number, photos or video, mileage since installation and a description of the issue. Keep the product and proof of purchase. Contact us before returning parts.

Coverage is generally for the original purchaser and is subject to inspection and the applicable warranty terms. Normal wear, improper installation, misuse, modifications and racing are commonly excluded. Labor, installation, shipping and related expenses are not covered unless expressly included in the applicable policy.

Mixed-brand kits follow each component manufacturer’s warranty; they do not automatically receive the EZT-branded kit warranty. Product-specific terms, purchase date and region control. This summary does not limit rights provided by applicable law. For brands not listed, contact us for the relevant terms.

Clicky

Why EZT?

A Volkswagen Golf behind a cart holding steering wheel and multimedia retrofit parts
Bloomfield, Connecticut
1 / 9

Established 2014 Bloomfield, Connecticut

Your next upgrade.
Our expertise.

Eurozone Tuning is an independent European automotive parts specialist based in Bloomfield, Connecticut.

A real shop behind your order

An established business with a passion for European cars.

Help from someone who knows the parts

Ask us about fitment, features and choosing your next upgrade.

Builds from the EZT community

Explore real customer cars and the upgrades they chose.