Choose your configuration: Select a Front Pair, Rear Pair, or the Complete Front + Rear Set before adding the product to your cart. All configurations are sold as matched left-and-right pairs, not individual dampers.
Bilstein B6 DampTronic Shocks for Porsche Panamera 970 with PASM
Restore the electronically controlled suspension in your 2010-2016 Porsche Panamera with Bilstein B6 Performance DampTronic dampers. These stock-height replacement upgrades work with the original coil springs and retain the factory Porsche Active Suspension Management electronic damping system.
Choose a front pair, rear pair, or a complete four-corner refresh kit. The complete set includes two front DampTronic struts and two rear DampTronic shocks, allowing all four original dampers to be replaced at the same time.
Front Pair Includes two front Bilstein DampTronic struts.
Part number: 26-265599 ×2
Rear Pair Includes two rear Bilstein DampTronic shocks.
Part number: 26-265605 ×2
Complete Four-Corner Set Includes both front struts and both rear shocks.
Four dampers total
Bill's Take
The Panamera is a heavy, fast car, and worn electronic dampers can make it feel loose, floaty, or less composed than it should. Bilstein B6 DampTronic is the right OEM+ solution for a PASM-equipped car that you do not want to lower. You retain the factory electronic suspension controls while getting fresh, vehicle-specific Bilstein damping. For a higher-mileage car that is still on its original shocks, I would strongly consider replacing all four corners together.
Key Features
- Bilstein B6 Performance DampTronic electronically controlled dampers
- Designed for 2010-2016 Porsche Panamera 970 models with factory PASM
- Retains the original electronic damping controls and selectable suspension modes
- Designed for use with the original factory coil springs
- Maintains the factory ride height
- Monotube gas-pressure construction
- Vehicle-specific Bilstein valving for improved body control and stability
- Available as a front pair, rear pair, or complete four-corner set
- Bilstein limited lifetime warranty
Configuration Options
| Option |
Included |
Part Numbers |
Total Dampers |
| Front Pair |
Left and right front struts |
26-265599 ×2 |
2 |
| Rear Pair |
Left and right rear shocks |
26-265605 ×2 |
2 |
| Complete Set |
Front pair and rear pair |
26-265599 ×2 and 26-265605 ×2 |
4 |
Vehicle Fitment
Porsche Panamera, 970 chassis, 2010-2016
For vehicles equipped with Porsche Active Suspension Management and electronically controlled factory dampers.
For vehicles with conventional coil-spring suspension only. Not for vehicles equipped with factory air suspension.
Front Damper Technical Specs
| Brand |
Bilstein |
| Series |
B6 Performance DampTronic |
| Position |
Front |
| Part Number |
26-265599 |
| Internal Design |
Monotube |
| Upper Mount |
Stem |
| Lower Mount |
Clevis |
| Spring Seat |
Included |
| Quantity Per Vehicle |
2 |
Rear Damper Technical Specs
| Brand |
Bilstein |
| Series |
B6 Performance DampTronic |
| Position |
Rear |
| Part Number |
26-265605 |
| Internal Design |
Monotube |
| Upper Mount |
Stem |
| Lower Mount |
Eye, 12.1 mm |
| Spring Seat |
Not included or required on rear shock |
| Quantity Per Vehicle |
2 |
What Is Not Included
- Coil springs
- Upper shock or strut mounts
- Bearings, boots, bump stops or dust covers
- Installation hardware unless supplied by Bilstein with the damper
- Air-suspension components
Important Fitment Note
Porsche offered the Panamera with multiple suspension configurations. This listing is specifically for vehicles with factory electronic PASM dampers and conventional coil springs. It is not intended for vehicles equipped with factory air suspension or vehicles without electronic damping.
VIN verification is strongly recommended before ordering. Professional installation and a four-wheel alignment are recommended after replacing the dampers.
